PP

We do cutting, PP boxes oversew by ultrasonic.

可冲切, PP 还可超声波烫合。

PP and PA6 were blended and extruded with a single screw extruder, PA6 could fibrillated in the matrix.

以聚丙烯为基体、尼龙6为分散相共混得到分散相成纤的原位复合材料。

For Group B, the vitalight lamp radiation and steaming of methanal plus PP were used in combined air sterilization.

紫外线灯照射与甲醛加PP熏蒸联合空气消毒为B组。

In this paper,crosslinking Poly Vinylpyrrolidone(PV PP) wassynthesized.Treatment of oolong tea beverage with PVPP and treating con ditions were investigated.

合成交联聚乙烯吡咯烷酮(PVPP)，研究PVPP对乌龙茶饮料的处理效果与条件。

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子含氧的极性基团。

Quiet redirection subsequently issues from the bassoons, which take up the wandering piano-theme, while the piano itself goes over into a pp semiquaver accompaniment.

低音管接着发出安静的转折信号，带出漫游式的钢琴主题。同时钢琴转变为最弱音的十六分音符的伴奏。

The main materials we used are including silicone rubber, fluorubber, natural rubber, neoprene rubber, EPDM, butyl rubber, polyurethane, polyethylene, EVA, ABS, PP, and PVC.

使用的原料有硅橡胶、氟橡胶、天然橡胶、氯丁橡胶、三元乙丙橡胶、丁基橡胶、聚氨脂橡胶、聚乙烯、聚丙烯、EVA、ABS、PP、PVC等。

Processing material: PVC, PP, PET, PC, PO, PS, ABS, EVA, metalline, plastic, vitreous, woodwork, wax candle,plaything, stationery, giving Any material quality surface printing processing

大面积丝印,彩印,移印,滚印,热转印,水转印,烫金,蚀刻平面,曲面印刷加工.

The flutes sink into a dreamy melody, soon to be joined by the oboes and tremolando strings, the melody gyrating somnabulistically and evanescing pp after eight bars.

长笛沉浸在梦幻般悦耳的曲调中，双簧管和弦乐的震声演奏很快加进来，曲调梦游般地旋转，在八小节之后减弱为最弱音。

The PP armchair produced by this special compound has a good impact resistance, high strength, good ageing resistance, good corrosion resistance and dimensional stability and good lighteness.

用该专用料生产的方椅具有强度高、韧性好、耐老化、耐腐蚀、尺寸稳定、表面光亮等优点,现已批量生产。

This paper compares the performance levels of selected GMS materials as antistat and mould release agents in homopolymer and random and impact copolymer PP injection moulding applications.

本文比较几种甘油单硬脂酸(GMS)产品在均聚无规与耐冲击共聚PP的注塑应用中作为抗静电剂和脱模剂的效果。