furnace 四级六级考研GMAT

The flame in the furnace can be looked at through colored glasses.

可以通过有色眼镜观看内的火焰。

The furnace broke down and the entire office building has no heat.

锅坏了, 整栋办公大楼没有暖气。

The metal glowed in the furnace.

金属在里发出灼热的光。

The Chatacteristics of Contop Smelting Process for cyclone furnace is discussed and make a comparison with silver furnace.

着重阐述了旋涡顶吹炼铜工艺技术特点,并与白银工艺行对比。

The casting of such a big copperware needed the metals above 1000 kilograms, also must have the big furnace.

铸造这样大的铜器，所需金属料当在1000千克以上，且必须有较大的。

On this basis of the research, the fragmentized mechanism of coke in a blast furnace is analyzed.

在此基础上，从理论上分析了用焦炭的破碎机理。

A continuous reheating industrial furnace is large inertia,pure delay,multi-variables,time-vary-ing,intercoupling complicated controlled plant,and has many uncertain factors.

连续式加热是个典型具有大惯性、纯滞后、多变量、时变并且相互耦合的复杂被控对象,而且有许多不确定因素。

The medium and small - sized furnace stack gunning with unshaped refractory materials is a new repatching technology.

中小型身内衬喷补是采用不定型耐火材料以喷射法修复身的一项新技术。

The practice showed that the blast furnace slags mainly consisted of melilite,cuspidine,bivalent metallic sulphide and Ce-Ca silica.

黄长石、枪晶石、二价金属硫化物、铈钙硅石是构成渣的主要矿物。

There was a low protecting wall to knock down the heat blasting from the pit of the furnace.

有一堵低矮的护壁挡住从膛里喷出的火焰。

The relation of internal microstructure damage degree of furnace tube in a ethylene pyrolyzer with weldability was studied.

研究了乙烯裂服役管材料内部的组织损伤程度与焊接性的关系。

The paper expounds and contrasts improved MC FeMn presmelting process adding ore in rocking furnace with original process .

论述了生产中碳锰铁的原摇预炼工艺和改后的摇加矿预炼工艺的特点,并行了对比。

The ethanol was dropped into furnace meanwhile ammonia was put through to nitempering. and the process parameter was optimized.

在通氨的同时,将乙醇直接滴入工作内,实现气体软氮化,并对工艺行了优选。

Problems of lead-zinc-aluminium scalings in washing water system for blast furnaces gas are analyzed. The solving methods are given.

针对酒钢煤气洗涤水系统结铅锌铝垢问题，行了分析探讨，并提出了决该问题的办法。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

是广大石油、化工行业中转化、反应、填料塔中最为理想的填料。

On the other hand, improving the serving environments，such as optimizing the furnace’s structure, regulating manhandle, etc. increase of service life.

另一方面，改善使用环境，如通过型改优化，规范人为操作等措施，以提其使用寿命。

The percentage of standard taphole arose from 83% to 100% after the taphole clay was used to tapholes of blast furnace.

使用这种性能有水炮泥后,铁口合格率由以前的83％提到100％。

We also have equipment and multi-purpose electronic resistivity automatic cryoscope and so on muffle furnace, electricity heat drum wind drying oven.

马弗、电热鼓风干燥箱等设备多功能电阻率自动测定仪。

Frame of the heating furnace like beer pasteurism sterilizer.Have an aluminium ingot preheat box.The box's length is near half a burdening span.

加热结构类似啤酒杀菌机，有一个铝锭预热箱，预热箱长度接近半个配料跨。

This article introduces the process design of rectification separation of methylnaphthalene and acenaphthylene fraction from Wash Oil with twin furnaces and twin column.

介绍了洗油通过双双塔分离精制生产甲基萘和苊油馏分的工艺设计。